AUTOCHK and CHKDSK endless loops

AUTOCHK and CHKDSK endless loops

Question:  How to fix AUTOCHK and CHKDSK loops when all else fails?

Summary:  a new HDD, with a cloned image of malware-infected WinXP that was thoroughly cleaned, continues to show C: Dirty file system bit set.  A forced 5-stage CHKDSK /f or CHKDSK /r is not resolving the probelm.  System appears to be 100% clean and runs
very well except for the "stuck" Dirty bit on C:.  Dirty bit can be effectively ignored using CHKNTFS /x c: but Scandisk and Defrag can't be run - probably other problems too.  Still trying to solve this issue without wiping it and starting over.

HP Pavilion zd8000 w/ WinXP 2005 Media Center.  Would not boot - ran an endless cycle of 3-stage AUTOCHKs and reboots.  If AUTOCHK was cancelled, WinXP would sometimes load, but very slowly...HDD was almost certainly failing.  Mounted the original 4200rpm HDD
on another box and successfully copied some data from it.  Recieved warnings from host that disk may have errors.
Used Ghost to clone a new 5400rpm HDD.

Installed new HDD in laptop and used MBAM, HitMan, RKill and ComboFix to fix numerous and varied viruses and Trojans (but unsure exactly which Trojans or Viruses, sorry).  Possible that one of these viruses caused BSOD 0X0000007b error when trying to boot to
Safe Mode; this was resolved during further virus removal and by deleting specific Windows Updates here:

http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/blue-screen-error-0x0000007b-in-windows-xp-after/73cea559-ebbd-4274-96bc-e292b69f2fd1

and here:

http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/windows-xp-sp3-boot-to-safe-mode-stop-0x0000007b/8347d3ea-8351-4709-9580-b692feeacb77

Once infections were gone, and after successful booting to Safe Mode, WinXP continued to report corrupted files ("exception processing message c00001012") along with Event ID 55 ("The file system structure on the disk is corrupt and unusable.
Please run the
CHKDSK utility on volume C:\") and the same 3-stage AUTOCHK loop on every start.

Performed Repair install using original media.  WinXP was SP3, now SP2 after repair.  Delaying further updates pending resolution of this issue.

The laptop now runs great - except that the Dirty bit seems to be permanently set for C: - Defrag won't run because it says a CHKDSK /f is scheduled.  No more "exception processing message" errors either (suspect that some Windows files were in fact corrupted,
possibly by Virus, possibly by previous HDD disc error, but were then repaired by Repair install).

FSUTIL always reports that C: is dirty.

I've set CHKNTFS /x C: and that's preventing AUTOCHK from running on every boot - now it boots and runs seemingly without issue, except that the Dirty bit is still set.  I'm not clear whether CHKNTFS /x C: should be prohibiting the AUTOCHK from running on every
boot, but that is what its doing regardless...in other words, I  don't have to reset CHKNTFS /x C: before every boot, it seems to be "permanently" set.  I don't think this is the designed function of the switch...

I've run both CHKDSK /f C: and CHKDSK /r C: under this condition (with CHKNTFS /x set) and both the 5-stage and 3-stage CHKDSK seemed to run successfully each time and respectively - however they also result in an endless loop of CHKDSKs at boot.  These are
not the same as the "regular" AUTOCHK loop that the system is stuck in with FSUTIL /d set.  I interpret this to mean that both the regular AUTOCHK and the manually-invoked CHKDSK are not able to successfully unset the Dirty bit despite not finding any errors.

After resetting FSUTIL /d C: the system still exhibits the same 3-stage AUTOCHK loop on every boot.  Event ID 55 continues to be logged when booted under CHKNTFS /d , is not logged when booted under CHKNTFS /x.

Keys to the Problem AUTOCHK and CHKDSK endless loops

Download SmartPCFixer for Free Now

Hello ReallyWildStuff,
 
If chkdsk is not removing the dirty bit, it would be my recommendation to format and perform a non-imaged installation.
At that stage, it would be the only way to definitively say that there are no hardware issues on the drive or controller.

As you have an image of the previous install, I presume that all of the data is safe.
 
Let us know what the results are.
Best regards,
Matthew_Ha

Note: It is recommended that you back up your files and folders before attempting this step:

• Move the mouse cursor over to the upper right side of the screen.
• A menu will pop up on the left. Click on the "Settings" feature on the menu.
• On the Settings window, click on the "Change PC settings."
• Now, left click on the "Update and recovery" feature.
• For the next step, left click on the "Recovery" feature.
• There is an option here saying "Refresh your PC without affecting your files." There, left click on the "Get started" button.
• Now, follow the instructions on the screen to finish the Refresh process.
• After the Refresh process has finished restart your Windows 8.1 or Windows 8 device.
• Check again to see if the error AUTOCHK and CHKDSK endless loops has been fixed.

If you do not possess the technical expertise required to accomplish this yourself or do not feel comfortable doing so, download and install a powerful automated tool to get the job done.

Recommended Method to Fix the Problem: AUTOCHK and CHKDSK endless loops:

How to Fix AUTOCHK and CHKDSK endless loops with SmartPCFixer?

1. You can Download Error Fixer here. Install it on your computer. When you open it, it will perform a scan.

2. After the scan is done, you can see the errors and problems need to be fixed. Click Fix All.

3. The Repair part is done, the speed of your computer will be much higher than before and the errors have been removed. You can also use other functions in SmartPCFixer. Like dll downloading, windows updating and print spooler error repair.

Related: AMD Radeon HD 7800M Win8 not working [Anwsered],I can access the internet, get on facebook and get to hotmail, but I can't play games on facebook and I can't open or respond to my e-mails,I keep getting this Media Player error when I log on my computer. [Anwsered],[Anwsered] System Hanging on shutdown and restart,Unable to get the Vlookup property of the WorksheetFunction class,Solution to Error: Error: "0x81000032 make sure the C: drive is online and set to NTFS" when trying to backup to external hard drive.
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,I'm always being signed off so annoying Tech Support
,Solution to Problem: Impossible to use Internet Explorer! I keep getting the same error message every time i try to use IE.
,Solution to Problem: Referencing data in another file
,Troubleshoot:Error: "0x81000032 make sure the C: drive is online and set to NTFS" when trying to backup to external hard drive. Error,External Hard Drive not listed in Windows 7 backup wizard Tech Support,Tech Support: I'm always being signed off so annoying,Solution to Problem: Impossible to use Internet Explorer! I keep getting the same error message every time i try to use IE.,Referencing data in Access using Excel [Anwsered],Need Best Way To Present Data [Anwsered],Same question but for windows 7 home edition,sometimes fullscreen won't activate [Solved],Solution to Error: We bought a new computer with windows 7 and it is constantly freezing. How do we fix this?,Solution to Error: Windows 8 update crash (2013-07-22)
Read More: Solution to Problem: Archiving email in Windows Mail,Backup stuck at 87% and CD stopped spinning in CD drive Tech Support,Authentication Certificate Missing when trying to connect to secure wireless network [Anwsered],Backup and Restore not working [Solved],How Can I Fix - asp.net Session not valid when open new page using showModalDialog in IE, works fine with Firefox?,application not found error,any problems in a team where one has Windows XP and the other has Windows 7?,Application/Object-Defined Error,An Excel formula question where hours are totalled and cumulating,Anyone know the hardware email?