Wednesday, March 30, 2016

How to Resolve - actually solved system restore 0x81000203 error code – bug problem?

actually solved system restore 0x81000203 error code – bug problem

SYSTEM RESTORE – BUG PROBLEM – SOLVED - including 0x81000203 error code
Microsoft wanted to charge at least £34 to solve problem,
whilst Microsoft’s Official Forum still don’t have a clue about solving the problem.
You can copy and paste this message to a sticky note.
I, eventually found the solution on YouTube.
YouTube: < How do I solve the following error: (0x81000203) >
Joshua Fountain - FlippinWindows on 18 Jun 2011
(Fix Your System Restore Error by following these Directions):
1: Start (bottom left hand corner (red, yellow, green and blue flag in a circle of the Task Bar))
A: \Computer\Right Click Properties\System Protection \System Protection Tab\
B: If you see, “Searching...” instead of, “C: (‘C’ drive)” – verifies a problem
2: Must verify that the 2 files, which causes the Restore Problems are set-up correctly
A: Microsoft Shadow Copy Provider - Needs to be set to "Automatic"
B: Volume Shadow Copy - Must be set to "Automatic"
3: Closed all opened applications on my Desktop (monitor).
4: Start\Run\Services\Enter
A: Alternately: Place, “Services” (without quotes) into Start\Run (box) and press < Enter >
5: Opens up the Services Window
A: Name (Maximize)
6: Find: "Microsoft software Shadow Copy Provider=Startup Type="Disabled"\Right Click\Properties
                \Startup type= "Automatic"\Apply\Start (wait until finish)\OK
A: I was going to skip this section, because, "Volume Shadow Copy" was already set to, "Automatic"
But, in the past, working with Microsoft's Technicians including Research-it may still be corrupted.
Therefore, I shall continue with 8: B:
B: Find: Volume Shadow Copy = \Startup Type = "Disabled"\Change to "Automatic"\Right Click \Properties\Startup type="Automatic"\Apply\Start (wait until finish)\OK
C: Then to end: Top right hand corner nearby Services the top row (right click)\Close
D: Test Restore Point: Start\Right Click Computer\Properties\System Protection \System Protection Tab\
There was a delay when, "Searching..." was being displayed,
But, luckily before I ended the process (Nothing to lose)
It now shows me; 1: New Volume (E:\ off) and 2: Local Disk (C: \ System Protection= on).
E: I shall now try to turn on E:\ 2TB HDD, (despite it is presently empty),
Until, I transfer data e.g.
word documents from C:\ SSD to E:\
Select New Volume (E :\) - (turns blue)
I must change,
1 "Turn off System Protection" to
2 "Restore System Settings and Previous"
A I left it at 10%, (because I have plenty of space)\Apply\OK.
It reverts me back to
1 System Properties\System Protection Tab and
2 E:\ 2 TB HDD Protection is switched on, which is excellent.
F: I shall now check the C:\ SSD (Solid State Drive)
Select: Restore system settings and previous versions of files
\within System Properties\ System Protection\Protection Settings
C: Select Local Disk (C:) (System) - (Turns blue)
Configure\40% Max Usage
1 But, 1% to 10% maybe enough for most users
2 \Apply\OK
I, Forgot to create, "Restore Points"
C:\Select Local Disk C:\Create
Within: Create a restore point insert description
1 For example, “Problem - Create C:\ 1st Restore Point”
2 < Create >
3 After process, luckily, “The restore point was created successfully."
4 < Closed >
G: I then repeated for E:\.
 < OK > Close System Properties
H: < X > Close Control Panel
I: I shall now carry out a Cold boot-up
Shut down computer, and when the computer is switched, off then
Switched the computer back on again to verify that Restore now works properly.
J: Verify System Restore is still working properly:
Start (bottom left hand corner (red, yellow, green and blue flag in a circle of the Task Bar))
\Computer\Right Click Properties\System Protection \System Protection Tab\
\In The Protection Settings:
1 It should show all the internal hard drives in the computer
                   For example to verify C:\ working properly either
A Check Restore Points already created either
1: < System Restore > within System
A: Start\right click Computer\Properties
B: \System Properties\System Protection\System\System Restore\Next or
2: Start\Run\System Restore\Enter (OK)
B Create a new Restore Points -
1: Start\right click Computer\Properties
2: \System Properties\System Protection\Create
A: Enter description for the restore point created
B: < Created >
C: < Closed >
K: Must find 2 files (check at least once a week):
MS Shadow Copy Provider = Needs to be set to "Automatic"
Volume Shadow Copy = must be set to "Automatic"
L: Best practice with any computer file/folder etcetera saved
Save-open-Verify data is correct-before saving again.

Anwsers to the Problem actually solved system restore 0x81000203 error code – bug problem

Download Error Fixer (Free)

Thank you for sharing the solution.
Hope this fix helps the other forum users encountering the same error.
In case you face any other issues with Windows in future, Feel free to post your query here on Windows Forums, we will be more than happy to assist

Open Action Center by clicking the Start button Picture of the Start button, clicking Control Panel, and then, under System and Security, clicking Review your computer's status.

Make sure your computer has at least the minimum amount of random access memory (RAM) required to run the program that is displaying the error. Look for the program requirements online or in the packaging information.

Another Safe way to Repair the Problem: actually solved system restore 0x81000203 error code – bug problem:

How to Fix actually solved system restore 0x81000203 error code – bug problem with SmartPCFixer?

1. You can Download Error Fixer here. Install it on your system. When you open it, it will perform a scan.

2. After the scan is done, you can see the errors and problems which need to be fixed.

3. The Fixing part is done, the speed of your computer will be much higher than before and the errors have been removed.

Related: [Solved] Applications have stopped working with SP1 on Windows 7!,[Solved] I can't find auto complete text in word 2007,[Solution] I need to keep reinstalling eHome Infrared Transceiver driver everytime my computer shuts down.,How to Resolve - system restore not working windows 7?,Unable to open embedded word file on the intranet. [Solved],Solution to Error: Error: "0x81000032 make sure the C: drive is online and set to NTFS" when trying to backup to external hard drive.
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,I'm always being signed off so annoying Tech Support
,Solution to Problem: Impossible to use Internet Explorer! I keep getting the same error message every time i try to use IE.
,Solution to Problem: Referencing data in another file
,[Anwsered] Thinkpad 8611 Boot,How to Resolve - Svchost Helper?,Fast Solution to Problem: L30 101 Driver Windows 7,Troubleshooter of Error: Io Device,How to Fix Error - Dell Laptop Code 39?
Read More: [Solved] Active Window Dropping Out,Troubleshooting:A few problems going on right now. Error,Solution to Error: ActiveX component can't creat object -Code 8000A01AD,How to Fix - a lot of programs at start-up. Can I get rid of some of them so my computer will start faster??,How to Resolve - A bug in display thousends Sepatrator in excel 2013?,Cannot delete empty file icon on desktop...,Cannot download flashplayer,can't get the CIA review progrom install which is an older version,Cannot access one website-DNS server not responding.,Can't Receive or Send Vista Windows Mail - Router stopped recognizing DSL connection & wants to dial up

No comments:

Post a Comment